Before proceeding with the installation of your games, make sure that your working environment is clean and free of dust. The floor must be dry and free of dirt.
TILE AND TERRAZZO FLOORING
If you plan to wax your game, please wait until the next day to apply the layers of wax to allow the glue solvents to evaporate. We recommend a minimum of 4 coats of wax.
LINOLEUM FLOOR OR OTHER UN WAXED SURFACE
If you do not wax your game, please wait 24 hours before allowing children to use it.
- Pair of scissors
- Soft, dry cloth
- Plastic squeegee (included in your set)
During installation, it is possible to reposition the games if you need to do so. Gently lift one corner and pull up. trying not to stretch the film.
Once the sticker has dried on the floor, it cannot be repositioned without damaging it.
It is recommended to clean the walls before installation. Although the installation is ideal on a smooth wall. it is possible to install the games to the painted brick.
- Pair of scissors
- Soft, dry cloth
- If you have more than one shape to glue. you can fix them temporarily using tape to get an overview of your wall.
We use vinyls with high adhesion to avoid any detachment of the riser with time. However, it is possible to reposition your vinyl at the start of installation in order to correct an alignment.
Clean each of the risers with a broom and soap to remove the encrusted dirt.
- Soft cloth
- Alcohol 99%
- Plastic squeegee
If your staircase is made of terrazzo, leave a margin of one cm at the top of the riser.
If your step is damaged be sure not to stick the vinyl on that part of the step.
